things to consider when buying led tape

by:Getian     2020-08-08
Thanks to the many different types of LED tape, it is worth making sure that the type you purchased meets the requirements of your project.
There are a few things to consider, all of which are detailed below: There are two main varieties of color LED tape;
Monochrome and discolored RGB.
The monochrome tape has warm white and cold white colors, which we call \"color temperature \".
\"The color temperature is only a specific white tone, which is very standard throughout the lighting industry.
Warm white is soft amber light, while cool white is clear daylight --like colour.
Color Changing RGB is more advanced, allowing users to create a changeable environment using the remote control.
The control usually provides 16 static colors and 4 color changing modes with adjustable brightness and speed settings.
Length according to the type of LED tape, all LED tape can be cut into a specific length, usually at intervals of 5 or 10 cm.
This means that you can send your size to your retailer and they can cut the size for you.
Measure the area where you plan to install the lights and send them forward.
With so much brightness to choose from, it can be difficult to choose the brightness that suits a particular application.
The brightness of the LED tape depends on the number of LEDs per meter and the size of a single LED chip, and more LED will produce brighter light.
While it is possible to physically measure the amount of light produced by LED tapes, not everyone is proficient in the \"lumens\" language.
\"To make things easier, we have divided our tapes into three categories: low, medium, and high.
The light output of the low brightness tape is quite low, but it is perfect for lighting in closed areas or places where too much light is not needed, such as in cabinets.
Medium brightness is better for creating subtle lighting effects, such as on the lower side of the kitchen cabinet or above the shelf.
The highlight bar is designed specifically for applications where the bar may have to compete with background lighting while remaining visible. Dimmable?
Although it is possible to dim the monochrome LED tape, this cannot be achieved using the standard dimmer switch.
Instead, you need to use a 12v dimmer switch specifically designed for LED tape.
As part of its functionality, color changing rgb led tapes often have Dimming options.
The power supply, sometimes called an LED driver, is a special unit whose output matches the voltage and current requirements of the LED tape (12V DC).
Tape will not work without it.
Choosing a power supply is simple.
Just multiply the wattage per meter by the meter of the tape you use, which will give you the \"load\" of the light \".
Your power supply should be large enough to handle this \"load \". \"Waterproof?
The IP rated coating provides varying degrees of protection against the movement of solid objects such as dust and dirt.
These products are usually in the form of an ip65coating that provides \"splash-proof\" protection, but cannot be completely submerged.
Whether you need an IP coating or not depends on where you use your belt.
If you are going to use them in the kitchen, in the bathroom or outside then it is wise.
Custom message
Chat Online
Chat Online
Chat Online inputting...